| Año | Autores y Títulos | Tipo |
|---|---|---|
| 2024 | Gallo, C., Duchêne, L., Quy Duc Pham, T., Jardin, R., Tuninetti, V., & Habraken, A.-M. (2024). Impact of Boundary Parameters Accuracy on Modeling of Directed Energy Deposition Thermal Field. Metals, 14(2), 173. https://doi.org/10.3390/met14020173 | WoS |
| 2024 | Valenzuela, M., Ciudad, G., Cárdenas, J. P., Medina, C., Salas, A., Oñate, A., Pincheira, G., Attia, S., & Tuninetti, V. (2024). Towards the development of performance-efficient compressed earth blocks from industrial and agro-industrial by-products. Renewable and Sustainable Energy Reviews, 194, 114323. https://doi.org/10.1016/j.rser.2024.114323 | WoS |
| 2024 | Osorio, L., Moreno, M., Rivera, M., Tuninetti, V., Chavarria, G. R., Duchêne, L., & Wheeler, P. (2024). A metaheuristic-based method for photovoltaic temperature computation under tropical conditions. Solar Energy, 271(February), 112414. https://doi.org/10.1016/j.solener.2024.112414 | WoS |
| 2023 | Arturo Padilla, Hugues Garnier, Juan I. Yuz, Fengwei Chen, Carlos Muñoz. Identification of continuous-time linear parameter varying systems with noisy scheduling variable using local regression. IEEE Access. DOI: 10.1109/ACCESS.2023.0322000 | WoS |
| 2024 | Tuninetti, V., Forcael, D., Valenzuela, M., Martínez, A., Ávila, A., Medina, C., Pincheira, G., Salas, A., Oñate, A., Duchêne, L. (2024). Assessing Feed-Forward Backpropagation Artificial Neural Networks for Strain-Rate-Sensitive Mechanical Modeling. Materials, 17(2), 317. https://doi.org/10.3390/ma17020317 | WoS |
| 2024 | Oñate, A., Sanhueza, J. P., Dueña, G., Wackerling, D., Sauceda, S., Salvo, C., Valenzuela, M., Medina, C., Seidou, A. H., Tchuindjang, J. T., Meléndrez, M., Rojas, D., Mertens, A., & Tuninetti, V. (2024). Sigma Phase Stabilization by Nb Doping in a New High-Entropy Alloy in the FeCrMnNiCu System: A Study of Phase Prediction and Nanomechanical Response. Metals, 14(1), 74. https://doi.org/10.3390/met14010074 | WoS |
| 2024 | Rojas-Ulloa, C., Morch, H., Tuninetti, V., Duchêne, L., & Habraken, A. M. (2024). Implementation of a modified Graham-Walles viscosity function within a Chaboche viscoplastic constitutive model. Computers and Mathematics with Applications, 155, 165–175. https://doi.org/10.1016/j.camwa.2023.12.002 | WoS |
| 2024 | Iglesias, F., Aguilera, A., Padilla, A., Vizan, A., & Diez, E. (2024). Application of computer vision techniques to estimate surface roughness on wood-based sanded workpieces. Measurement, 224, 113917. doi: https://doi.org/10.1016/j.measurement.2023.113917 | WoS |
| 2023 | Cioni, S., Papi, F., Pagamonci, L., Bianchini, A., Ramos-García, N., Pirrung, G., Corniglion, R., Lovera, A., Galván, J., Boisard, R., Fontanella, A., Schito, P., Zasso, A., Belloli, M., Sanvito, A., Persico, G., Zhang, L., Li, Y., Zhou, Y., Mancini, S., Boorsma, K., Amaral, R., Viré, A., Schulz, C. W., Netzband, S., Soto-Valle, R. … Robertson, A. (2023). On the characteristics of the wake of a wind turbine undergoing large motions caused by a floating structure: an insight based on experiments and multi-fidelity simulations from the OC6 project Phase III. Wind Energy Science, 8(11), 1659–1691. https://doi.org/10.5194/wes-8-1659-2023 | WoS |
| 2023 | Iglesias, F., Aguilera, A., Padilla, A., Madaf, M., & Diez, E. (2023). Optical Evaluation of Surface Roughness in Wood Parts Processed by Robotic Sanding. A. Vizán Idoipe & J. C. García Prada (Eds.), Proceedings of the XV Ibero-American Congress of Mechanical Engineering (pp. 355–361). Cham: Springer International Publishing. | Sin Indexación |
| 2023 | Martínez, D. S., Cifuentes, E. D., Giraldo, M. M., & Bolívar, J. P. (2023). An Integrated Methodology for the Optimization of Process Parameters in Micromanufacturing: A Micromilling Case Study. A. Vizán Idoipe & J. C. García Prada (Eds.), Proceedings of the XV Ibero-American Congress of Mechanical Engineering (pp. 348–354). Cham: Springer International Publishing. | Sin Indexación |
| 2023 | Alzugaray-Franz, R., Diez-Cifuentes, E., Leal-Muñoz, E., Villaverde-San José, M., & Vizán-Idoipe, A. (2023). Determination of Tool Wear in Peripheral Milling Operations Based on Acoustic Emission Signals. A. Vizán Idoipe & J. C. García Prada (Eds.), Proceedings of the XV Ibero-American Congress of Mechanical Engineering (pp. 300–305). Cham: Springer International Publishing. | Sin Indexación |
| 2023 | Díaz-Plaza De Los Reyes, N., Alzugaray-Franz, R., Leal-Muñoz, E., La Fé-Perdomo, I., Ramos-Grez, J., & Diez-Cifuentes, E. (2023). Influence of Material Properties in Milling Forces of AISI 316L Obtained by L-PBF. A. Vizán Idoipe & J. C. García Prada (Eds.), Proceedings of the XV Ibero-American Congress of Mechanical Engineering (pp. 313–319). Cham: Springer International Publishing. | Sin Indexación |
| 2023 | Rilling, S., Ríos, I., Gómez, Á., Valenzuela, M., Oñate, A., & Tuninetti, V. (2023). Optimized infill density through topological optimization increases strength of additively manufactured porous polylactic acid. The International Journal of Advanced Manufacturing Technology, 0123456789. https://doi.org/10.1007/s00170-023-12554-z | WoS |
| 2024 | Aranda, P. M., García-Herrera, C., Celentano, D., Tuninetti, V., Toro, S. A., & Landeros, F. (2024). Hybrid numerical–experimental strategy for damage characterization of SAE 1045 steel. European Journal of Mechanics - A/Solids, 103, 105169. https://doi.org/10.1016/j.euromechsol.2023.105169 | WoS |
| 2023 | Duchêne, L., Morch, H., Rojas-Ulloa, C., Tuninetti, V., Habraken, A.M. (2024). Efficient Thermo-Mechanical Modelling of Cyclic Loading with Chaboche Type Constitutive Law Coupled with Damage. In: Mocellin, K., Bouchard, PO., Bigot, R., Balan, T. (eds) Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-42093-1_28 | Scopus |
| 2023 | Valenzuela, M., Leiva, J., Salas, A., Ciudad, G., Cárdenas, J. P., Oñate, A., Hunter, R., Attia, S., & Tuninetti, V. (2023). CEBs with GRC: fabrication, characterization, modeling, and correlation with microstructural fracture features. Materials Today Communications, 107028. https://doi.org/10.1016/j.mtcomm.2023.107028 | Wos |
| 2023 | Salazar, J.G., San-Martín, M.R. (2023). Mechatronic Design of a New Fluid Pivot Journal Bearing. In: Vizán Idoipe, A., García Prada, J.C. (eds) Proceedings of the XV Ibero-American Congress of Mechanical Engineering. IACME 2022. Springer, Cham. https://doi.org/10.1007/978-3-031-38563-6_64 | Sin Indexación |
| 2023 | Chen, F., Hu, H., Zhao, L., Padilla, A., & Hou, J. (2023). A Linear Parameter Varying Hammerstein Model for Dynamic Modeling of WPT Systems. IEEE Transactions on Power Electronics, 1–15. https://doi.org/10.1109/TPEL.2023.3306155 | Wos |
| 2023 | Tuninetti, V., Oñate, A., Valenzuela, M., Sepúlveda, H., Pincheira, G., Medina, C., García, C., Duchêne, L., & Habraken, A. M. (2023). Characterization approaches affect asymmetric load predictions of hexagonal close-packed alloy. Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2023.08.255 | Wos |
| 2023 | Oñate, Á., Torres, E., Olave, D., Ramírez, J., Medina, C., Sanhueza, J. P., Melendrez, M., Tuninetti, V., & Rojas, D. (2023). Exploring the Impact of Cooling Rate on Microstructural Features, Mechanical Properties, and Corrosion Resistance of a Novel Nb-Stabilized Super Duplex Stainless Steel in Shielded Metal Arc Welding. Crystals, 13(8), 1192. https://doi.org/10.3390/cryst13081192 | Wos |
| 2023 | Oñate, A., Sanhueza, J. P., Zegpi, D., Tuninetti, V., Ramirez, J., Medina, C., Melendrez, M., & Rojas, D. (2023). Supervised machine learning-based multi-class phase prediction in high-entropy alloys using robust databases. Journal of Alloys and Compounds, 962, 171224. https://doi.org/10.1016/j.jallcom.2023.171224 | Wos |
| 2023 | Diez-Cifuentes, E., Alzugaray-Franz, R., Padilla-Bernedo, A., Leal-Muñoz, E., Madaf, M., Sanhueza-Carvajal, P., & Gonzalez-Salazar, J. (2023). Robotized workstation for intelligent sanding processes of wooden workpieces. DYNA, 98(4), 362-368. https://doi.org/10.6036/10873 | Wos |
| 2023 | Rojas-Ulloa, C., Tuninetti, V., Sepúlveda, H., Betaieb, E., Pincheira, G., Gilles, G., Duchêne, L., & Habraken, A. M. (2023). Accurate numerical prediction of ductile fracture and micromechanical damage evolution for Ti6Al4V alloy. Computational Mechanics. https://doi.org/10.1007/s00466-023-02362-3 | Wos |
| 2023 | Hidalgo, P., Echeverria, A., Romero, L., Navia, R., & Hunter, R. (2023). Microwave-assisted epoxidized oil production from the wet microalga Nannochloropsis gaditana to obtain environmentally friendly epoxy resins. Chemical Engineering and Processing - Process Intensification, 183, 109215. https://doi.org/10.1016/j.cep.2022.109215 | Wos |
| 2023 | Hidalgo, P., Salgado, L., Ibacache, N., & Hunter, R. (2023). Influence of Biochar and Bio-Oil Loading on the Properties of Epoxy Resin Composites. Polymers, 15(8), 1895. https://doi.org/10.3390/polym15081895 | Wos |
| 2023 | Hidalgo, P., Navia, R., Hunter, R., Camus, C., Buschmann, A., & Echeverria, A. (2023). Carbon nanotube production from algal biochar using microwave irradiation technology. Journal of Analytical and Applied Pyrolysis, 172, 106017. https://doi.org/10.1016/j.jaap.2023.106017 | Wos |
| 2023 | De la Fuente, A., Castillo, R., Oñate, A., Hermosilla, R., Escudero, B., Sepúlveda, J., Vargas-Silva, G., Meléndrez, M. F., Tuninetti, V., & Medina, C. (2023). Quantifying the influence of reinforcement architecture on the planar mechanical properties of 3D-printed continuous fiber-reinforced thermoplastic composites. The International Journal of Advanced Manufacturing Technology, 0123456789. doi: 10.1007/s00170-023-11569-w | Wos |
| 2023 | Tuninetti, V., Medina, C., Salas, A., Valdivia, I., Fernández, E., Meléndrez, M., Pincheira, G., Flores, P. (2023). Fiber-Reinforced Composite Materials: Characterization and Computational Predictions of Mechanical Performance. Springer International Publishing, Cham. https://doi.org/10.1007/978-3-031-32558-8 | Book |
| 2023 | Salas, A., Berrio, M. E., Martel, S., Díaz-Gómez, A., Palacio, D. A., Tuninetti, V., Medina, C., & Meléndrez, M. F. (2023). Towards recycling of waste carbon fiber: Strength, morphology and structural features of recovered carbon fibers. Waste Management, 165(April), 59–69. https://doi.org/10.1016/j.wasman.2023.04.017. Optional access: https://authors.elsevier.com/a/1gxzj,LlFPKFH1. | Wos |
| 2023 | Jardin, R. T., Tuninetti, V., Tchuindjang, J. T., Duchêne, L., Hashemi, N., Tran, H. S., Carrus, R., Mertens, A., & Habraken, A. M. (2023). Optimizing laser power of directed energy deposition process for homogeneous AISI M4 steel microstructure. Optics & Laser Technology, 163(January), 109426. https://doi.org/10.1016/j.optlastec.2023.109426 y https://authors.elsevier.com/a/1gqCY6wNUutWx | Wos |
| 2023 | Bustos, Flavia, Jorge Hinojosa, and Víctor Tuninetti. 2023. "Computational Comparison of Performance of Different Steel Plate Shear Yielding Dampers" Buildings 13, no. 3: 793. https://doi.org/10.3390/buildings13030793 | Wos |
| 2023 | Hermosilla, R., Oñate, A., Castillo, R., De la fuente, A., Sepúlveda, J., Escudero, B., Vargas-Silva, G., Tuninetti, V., Melendrez, M., Medina, C., 2023. Influence stacking sequence and heat treatments on the out-of-plane mechanical properties of 3D-printed fiberglass-reinforced thermoplastics. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-023-11050-8 | Wos |
| 2022 | Zapata, J. M., Leal, E., Hunter, R., de Souza, R. F., & Borie, E. (2022). Biomechanical Behavior of Narrow Dental Implants Made with Aluminum- and Vanadium-Free Alloys: A Finite Element Analysis. Materials, 15(24), 1–10. https://doi.org/10.3390/ma15248903 | Wos |
| 2022 | H. Sepúlveda, R. Valle, G. Pincheira, C.S. Prasad, A. Salas, C. Medina, V. Tuninetti. Dynamic numerical prediction of plasticity and damage in a turbofan blade containment test, Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. (2022). https://doi.org/10.1177/14644207221136126 | Wos |
| 2022 | Valle, R.; Pincheira, G.; Tuninetti, V.; Garrido, C.; Treviño, C.; Morales, J. Evaluation of the Orthotropic Behavior in AN Auxetic Structure Based on a Novel Design Parameter of a Square Cell with Re-Entrant Struts. Polymers 2022, 14, 4325. https://doi.org/10.3390/polym14204325 | Wos |
| 2022 | A. Díaz-Gomez, M. Godoy, M.E. Berrio, J. Ramirez, A.F. Jaramillo, C. Medina, M. Montaño, M.F. Meléndrez, Evaluation of the Mechanical and Fire Resistance Properties of Rigid Tannin Polyurethane Foams with Copper Oxide Nanoparticles, Fibers Polym. 23 (2022) 1797–1806. https://doi.org/10.1007/s12221-022-4152-x. | Wos |
| 2022 | A. Catalán, A. Martínez, C. Muñoz, C. Medina, T. Marzialetti, M. Montaño, A.F. Jaramillo, M.F. Meléndrez, The effect of preheating of nano-filler composite resins on their degree of conversion and microfiltration in dental fillings, Polym. Bull. (2022). https://doi.org/10.1007/s00289-021-03880-x. | Wos |
| 2022 | A. Salas, A.F. Jaramillo, D.A. Palacio, A. Díaz-Gómez, D. Rojas, C. Medina, E. Pérez-Tijerina, F. Solís-Pomar, M.F. Meléndrez, Hybrid Materials Based on Nanoparticles Functionalized with Alkylsilanes Covalently Anchored to Epoxy Matrices, Polymers (Basel). 14 (2022) 1579. https://doi.org/10.3390/polym14081579. | Wos |
| 2022 | Salas, A., Oñate, Á., Escudero, B., Medina, C., Tuninetti, V., & Meléndrez, M. (2022). Effect of 0.5% CNT reinforcement of a glass fiber composite on strength and cyclic damage induced by transverse and out-of-plane compressive loads. Journal of Composite Materials. https://doi.org/10.1177/00219983221106522 | Wos |
| 2022 | Tuninetti, V.; Gilles, G.; Sepúlveda, H.; Pincheira, G.; Flores, P.; Duchêne, L.; Habraken, A.M. (2022) Direct and Inverse Characterization of the Asymmetric Hardening Behavior of Bulk Ti64 Alloy. Phys. Sci. Forum 4, 2. https://doi.org/10.3390/psf2022004002 | Wos |
| 2022 | Valle, R.; Pincheira, G.; Tuninetti, V.; Fernandez, E.; Uribe-Lam, E. Design and Characterization of Asymmetric Cell Structure of Auxetic Material for Predictable Directional Mechanical Response. Materials 2022, 15, 1841. https://doi.org/10.3390/ |
Wos |
| 2021 | Betancourt Astete, R.; Gutiérrez-Cáceres, N.; Muñoz-Catalán, M.; Mora-Chandia, T. Direct Improvement in the Combustion Chamber and the Radiant Surface to Reduce the Emission of Particles in Biomass Cooking Stoves Used in Araucanía, Chile. Sustainability 2021, 13, 7205. https://doi.org/10.3390/su13137205 | Wos |
| 2021 | Ignacio Valdivia, Cristian Canales, Víctor Tuninetti, Paulo Flores, and Carlos Medina. 2021. Numerical Prediction of Failure in Unidirectional Fiber Reinforced Composite. International Journal of Applied Mechanics 13 (06), 2150073. https://doi.org/10.1142/ |
Wos |
| 2021 | Carlos Rojas-Ulloa, Marian Valenzuela, Víctor Tuninetti, Anne Marie Habraken (2021). Identification and validation of an extended Stewart-Cazacu micromechanics damage model applied to Ti–6Al–4V specimens exhibiting positive stress triaxialities. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 235(6), 1248–1261. https://doi.org/10.1177/ |
Wos |
| 2021 |
Rodrigo Valle, Gonzalo Pincheira, Víctor Tuninetti (2021) Design of an auxetic cellular structure with different elastic properties in its three orthogonal directions. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 235(6), 1341–1350. https://doi.org/10.1177/ |
Wos |
| 2021 | Víctor Tuninetti, Ricardo Alzugaray, Jorge González, Marian Valenzuela, Andrés Jaramillo, Eduardo Diez (2021). Root cause and vibration analysis to increase veneer manufacturing process efficiency: a case study on an industrial peeling lathe. European Journal of Wood and Wood Products, 79(4), 951–966. https://doi.org/10.1007/ |
Wos |
| 2021 | Rilling, S. Tuninetti, V. 2021. Diseño para la fabricación aditiva con optimización topológica: una estrategia para aumentar resistencia de componentes críticos. EAE. ISBN: 978-620-3-58726-5 (libro) https://www.morebooks.shop/ |
Sin Indexación |
| 2021 |
Rodrigo Navia, Robinson Betancourt, María Cristina Diez, Noelia Sepúlveda, Gustavo Curaqueo, Mara Cea, Claudio Toro, Aixa González, María Eugenia González (2021) Process for the production of a controlled release nitrogen fertilizer using biochar as a renewable support matrix. Brazilian Patent No. 112015013462B1. https://patents.google.com/patent/BR112015013462B1/en?oq=112015013462 |
Sin Indexación |
| 2021 | Francisco Solis-Pomar, Andrés Díaz-Gómez, María Elizabeth Berrío, Jesús Ramírez, Andrés Felipe Jaramillo, Katherina Fernández, David Rojas, Manuel Francisco Melendrez and Eduardo Pérez-Tijerina (2021). A Dual Active-Passive Coating with Intumescent and Fire-Retardant Properties Based on High Molecular Weight Tannins. https://doi.org/10.3390/coatings11040460 | Sin Indexación |
| 2021 | Andrés Felipe Jaramillo, Andrés Díaz-Gómez, Jesús Ramirez, María Elizabeth Berrio, Vanessa Cornejo, David Rojas, Luis Felipe Montoya, Adriana Mera and Manuel Francisco Melendrez (2021). Eco-Friendly Fire-Resistant Coatings Containing Dihydrogen Ammonium Phosphate Microcapsules and Tannins, https://doi.org/10.3390/coatings11030280 | Sin Indexación |
| 2021 | A. F. Jaramillo, J. C. Martinez, P. Flores, C. Medina, D. Rojas, A. Díaz‑Gómez, C. Fuentealba and M. F. Meléndrez (2021). Condensed tannin resins extracted from Pinus radiata bark as a support matrix in carbon nanofiber‑reinforced polymers, https://doi.org/10.1007/s00289-020-03530-8. | Sin Indexación |
| 2021 | Diego Vergara-Llanos, Tania Koning, Maria Francisca Pavicic, Helia Bello-Toledo, Andrés Díaz-Gómez, Andrés Jaramillo, Manuel Melendrez-Castro, Pamela Ehrenfeld,Gabriela Sánchez-Sanhueza (2021). Antibacterial and cytotoxic evaluation of copper and zinc oxide nanoparticles as a potential disinfectant material of connections in implant provisional abutments: An in-vitro study, https://doi.org/10.1016/j.archoralbio.2020.105031. | Sin Indexación |
| 2021 | C. Rojas-Ulloa, C. Bouffioux, A. F. Jaramillo, C. M. García-Herrera, T. Hussain, L. Duchêne, G. Riu, J. Josep Roa, P. Flores, A. Marie Habraken, V. Tuninetti, Advanced Engineering Materials 2021, 2001341. https://doi.org/10.1002/adem. |
Wos |
| 2021 | Salas, A., Medina, C., Vial, J. T., Flores, P., Canales, C., Tuninetti, V., Jaramillo, A. F., & Meléndrez, M. F. (2021). Ultrafast carbon nanotubes growth on recycled carbon fibers and their evaluation on interfacial shear strength in reinforced composites. Scientific Reports, 11(1), 5000. https://doi.org/10.1038/s41598-021-84419-y | Wos |
| 2021 | Morch, H., Duchêne, L., Harzallah, R., Tuninetti, V., Habraken, A.M. Efficient temperature dependence of parameters for thermomechanical finite element modeling of Alloy 230. European Journal of Mechanics - A/Solids, 2021, 85, 104116. https://doi.org/10.1016/j.euromechsol.2020.104116 | Wos |
| 2021 | Tuninetti, V.; Jaramillo, A.F.; Riu, G.; Rojas-Ulloa, C.; Znaidi, A.; Medina, C.; Mateo, A.M.; Roa, J.J. Experimental Correlation of Mechanical Properties of the Ti-6Al-4V Alloy at Different Length Scales. Metals 2021, 11, 104. https://doi.org/10.3390/ |
Wos |
| 2020 | Rodrigo Navia, Isaac Reyes, Tomás Mora, Robinson Betancourt (2020). Bio-additive for heavy oils, which comprises rapeseed oil methyl esters, surfactants, diluents and metal oxides, and use thereof for reducing polluting emissions and as a combustion efficiency bio-enhancer for heavy oils. U.S. Patent No. 10723966B2. https://patents.google.com/patent/US10723966B2/en?oq=10723966 | Sin Indexación |
| 2020 | Jardin, R.T.; Tuninetti, V.; Tchuindjang, J.T.; Hashemi, N.; Carrus, R.; Mertens, A.; Duchêne, L.; Tran, H.S.; Habraken, A.M. Sensitivity Analysis in the Modelling of a High Speed Steel Thin-Wall Produced by Directed Energy Deposition. Metals 2020, 10, 1554. https://doi.org/10.3390/ |
Wos |
| 2020 | Serje, D., Pacheco, J.,Diez, E. (2020), “Micromilling research: current trends and future prospects”, The International Journal of Advanced Manufacturing Technology 111:1889-1916 | Sin Indexación |
| 2020 | Sio-Sever, A.; Leal-Muñoz, E.; Lopez-Navarro, J.M.; Alzugaray-Franz, R.; Vizan-Idoipe, A.; de Arcas-Castro, G. Non-Invasive Estimation of Machining Parameters during End-Milling Operations Based on Acoustic Emission. Sensors 2020, 20, 5326. https://doi.org/10.3390/ |
Sin Indexación |
| 2020 | E. Ferreras-Higuero, E. Leal-Muñoz, J. García de Jalón, E. Chacón, A. Vizán, Robot-process precision modelling for the improvement of productivity in flexible manufacturing cells, Robotics and Computer-Integrated Manufacturing, Vol. 65, 2020, 101966, https://doi.org/10.1016/j. |
Sin Indexación |
| 2020 | Morch, H., Duchêne, L., Harzallah, R., Tuninetti, V. Habraken, A.M. 2020. Efficient temperature dependence of parameters for thermomechanical finite element modeling of Alloy 230. European Journal of Mechanics - A/Solids. https://doi.org/10.1016/j.euromechsol.2020.104116 | Wos |
| 2020 | Rym Harbaoui; Olfa Daghfas; Amna Znaidi; Victor Tuninetti., Mechanical behavior of materials with a compact hexagonal structure obtained by an advanced identification strategy of HCP material, AZ31B-H24. Frattura ed Integrità Strutturale 14, 295-305. https://doi.org/10.3221/IGF- |
Scopus |
| 2020 | Chen F., Padilla A., Young P.C., Garnier H., Data-Driven Modeling of Wireless Power Transfer Systems With Slowly Time-Varying Parameters, Vol. 28, Issue 3, 1074-1082, IEEE Transactions on Power Electronics, 2020. doi: 10.1109/TCST.2019.2896124 | Sin Indexación |
| 2020 | A.F. Jaramillo, C. Medina, P. Flores, C. Canales, C. Maldonado, P. Castaño, D. Rojas and M.F. Meléndrez (2020). Improvement of thermomechanical properties of composite based on hydroxyapatite functionalized with alkylsilanes in epoxy matrix. Ceramics International 46, 8368-8378. https://doi.org/10.1016/j.ceramint.2019.12.069 | Sin Indexación |
| 2020 | Sanhueza J.P., Rojas D., García J., Melendrez M.F., Toledo E., Castro Cerda F.M., Montalba C., Jaramillo A.F. Effect of boron in the coarsening rate of chromium-rich carbides in 9%-12% chromium martensitic creep-resistant steel: experiment and modeling at 650 (degC), Metals and Materials International, doi.org/10.1007/s12540-020-00676-y, 2019 | Sin Indexación |
| 2020 | Tuninetti, V., Flores, P., Pincheira, G., Medina, C., Duchêne, L., Habraken, A.M., Alternative experimental method for characterizing the deformation behavior of Ti6Al4V at constant strain rates over the full elastoplastic range. International Journal of Material Forming, 2020. https://doi.org/10.1007/s12289-020-01543-2 | Wos |
| 2019 | M.L. Chaves, L. Sánchez-González, E.Diez, H. Pérez, A.Vizán, 2019. Experimental assessment of quality in injection parts using a fuzzy system with adaptive membership functions, Neurocomputing. https://doi.org/10.1016/j.neucom.2019.06.108 | Sin Indexación |
| 2019 | F. Chen, H. Garnier, A. Padilla, M. Gilson, Recursive IV identification of continuous-time models with time-delay from sampled data, IEEE Transactions on Control Systems Technology, 2019. DOI: 10.1109/TCST.2019.2896124 | Sin Indexación |
| 2019 | Fajardo-Pruna M., López-Estrada L., Pérez H., Diez E., Vizán A., 2019. Analysis of a single-edge micro cutting process in a hybrid parallel-serial machine tool, International Journal of Mechanical Sciences, Vol. 151, 222-235. https://doi.org/10.1016/j.ijmecsci.2018.11.023 | Sin Indexación |
| 2019 | A. F. Jaramillo, S. A. Riquelme, G. Sánchez-Sanhueza, C. Medina, E. Pérez-Tijerina, F. Solís-Pomar, D. Rojas, C. Montalba and M. F. Melendrez (2019). Comparative study of the antimicrobial effect of nanocomposites and composites based on poly (butylene adipate-co-terephthalate) (PBAT) with copper, copper/cuprous oxide nanoparticles and copper sulphate. Nanoscale Research Letters, 14 (158) 1-17. https://doi.org/10.1186/s11671-019-2987-x | Sin Indexación |
| 2019 | A.F. Jaramillo, L.F. Montoya, J. Manoj. Prabhaka, J. P. Sanhueza, K. Fernández, M. Rohwerder, D. Rojas, C. Montalba, and M.F. Melendrez (2019). Formulation of a multifunctional coating based on polyphenols extracted from the Pine radiata bark and functionalized zinc oxide nanoparticles: Evaluation of hydrophobic and anticorrosive properties. Progress in Organic Coatings, 135, 191-204. https://doi.org/10.1016/j.porgcoat.2019.06.011 | Sin Indexación |
| 2019 | E. Leal-Muñoz, E. Diez, J. Marquez, A. Vizan, 2019. Feasibility of machining using low payload robots, Procedia Manufacturing, 41, 594-601. https://doi.org/10.1016/j.promfg.2019.09.047 | Sin Indexación |
| 2019 | Padilla A., Garnier H., Young P.C., Chen F., Yuz J.I. Identification of continuous-time models with slowly time-varying parameters, Control Engineering Practice, 93, 104165, 2019 | Sin Indexación |
| 2019 | S.A. Riquelme, Koduri Raman, A.F. Jaramillo (2019). Ceramics fillers enhancing effects on the dielectric properties of poly(vinylidene fluoride) matrix composites prepared by the torque rheometer method. Results in Physics, 15, 102800. https://doi.org/10.1016/j.rinp.2019.102800 | Sin Indexación |
| 2019 | J.P. Sanhueza, D. Rojas, J. García, M.F. Melendrez, E. Toledo, C. Montalba, M.I. Alvarado and A.F. Jaramillo (2019). Computational modeling of the effect of B and W in the phase transformation of M23C6 carbides in 9 to 12 pct Cr martensitic/ferritic steels. Materials Research Express, 6, 1165d3. https://doi.org/10.1088/2053-1591/ab500c | Sin Indexación |
| 2019 | Tuninetti, V., Flores, P., Medina, C., Duchêne, L., Habraken, A.M., Effect of small strain rate variations on the identification of the compressive behaviour of Ti6Al4V. 14ème Colloque National en Calcul des Structures (CSMA2019), May 2019, Giens, France. https://csma2019.sciencesconf.org/251648 | Sin Indexación |
| 2019 | Tuninetti, V., Flores, P., Pincheira, G., Gilles, G., Duchêne, L., Habraken, A.M., 2019. Impact of distortional hardening and the strength differential effect on the prediction of large deformation behavior of the Ti6Al4V alloy. Meccanica, 54(11), 1823-1840. https://doi.org/10.1007/s11012-019-01051-x | Wos |
| 2018 | Tuninetti, V., Mechanical behavior of Ti-6Al-4V titanium alloy: testing, characterization and finite element modeling. EAE. ISBN: 978-620-2-10285-8 (Book) https://www.morebooks.shop/ |
Sin Indexación |
| 2018 | Leal-Muñoz E., Diez E., Perez H., Vizan A. Identification of the actual process parameters for finishing operations in peripheral milling, Transactions of the ASME: Journal of Manufacturing Science and Engineering, Vol. 140, 084502-084509, 2018 | Sin Indexación |
| 2018 | Leal-Muñoz, E., Diez E., Perez, H., Vizan, A. Accuracy of a new online method for measuring machining parameters in milling, Measurement, Vol. 128, 170-179, 2018. | Sin Indexación |
| 2017 | Diez E., Leal-Muñoz E., Perez H., Vizan A. Dynamic analysis of a piezoelectric system to compensate for workpiece deformations in flexible milling, Mechanical Systems and Signal Processing, Vol 91, 278-294, 2017. | Sin Indexación |
| 2016 | Jorge G. Salazar and Ilmar F. Santos (2016), Active Tilting-Pad Journal Bearings Supporting Flexible Rotors: Part II – The Model-Based Feedback-Controlled Lubrication, Tribology International. doi:10.1016/j.triboint.2016.11.019. | Sin Indexación |
| 2016 | Jorge G. Salazar and Ilmar F. Santos (2016), Active Tilting-Pad Journal Bearings Supporting Flexible Rotors: Part I – The Hybrid Lubrication, Tribology International. doi:10.1016/j.triboint.2016.11.018. | Sin Indexación |
| 2016 | Tuninetti, V., Yuan, S., Gilles, G., Guzmán, C., Habraken, A., Duchêne, L. (2016). Modeling the ductile fracture and the plastic anisotropy of DC01 steel at room temperature and low strain rates. Journal of Physics: Conference Series 734, 032075. doi:10.1088/1742-6596/734/3/032075 | Sin Indexación |
| 2016 | Jorge G. Salazar and Ilmar F. Santos (2016). On the Controllability and Observability of Actively-Lubricated Journal Bearings with Pads with Different Nozzle-Pivot Configurations. ASME. J. Tribol. doi:10.1115/1.4033053. | Sin Indexación |
| 2016 | Jorge G. Salazar and Ilmar F. Santos (2016), Experimental identification of dynamic coefficients of lightly loaded tilting-pad bearings under several lubrication regimes. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, doi:10.1177/1350650116635926 | Sin Indexación |
| 2015 | J. Moller, R. Hunter, J. Molina, A. Vizán, J. Peréz and L. F. M. da Silva (2015), Influence of the temperature on the fracture energy of a methacrylate adhesive for mining applications, Applied Adhesion Science 3:14. doi:10.1186/s40563-015-0041-5 | Sin Indexación |
| 2015 | E. Diez, Perez H., J. Marquez, A. Vizan (2015), Feasibility study of in-process compensation of deformations in flexible milling, International Journal of Machine Tools and Manufacture 94, 1-14. doi:10.1016/j.ijmachtools.2015.03.008 | Sin Indexación |
| 2015 | J. Gonzalez Salazar, Ilmar Ferreira Santos (2015) Feedback-controlled lubrication for reducing the lateral vibration of flexible rotors supported by tilting-pad journal bearings, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, doi:10.1177/1350650115577027 | Sin Indexación |
| 2015 | Hilde Perez, Eduardo Diez, Juan de Juanes Marquez, Antonio Vizan, (2015) Generic Mathematical Model for Efficient Milling Process Simulation, Mathematical Problems in Engineering, vol. 2015, Article ID 875045, 10 pages. doi:10.1155/2015/875045 | Sin Indexación |
| 2015 | J. Gonzalez Salazar, Ilmar Ferreira Santos (2015) Exploring integral controllers in actively-lubricated tilting-pad journal bearings, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, doi: 10.1177/1350650115570697 | Sin Indexación |
| 2014 | D. Aracena, P. Betancourt, E. Borie, M. Guzmán & R. Fuentes (2014), WaveOne: a simple and safe way to perform an endodontic treatment International Journal of Odontostomatology, 8 (2), 207-210 (Scielo) | Sin Indexación |
| 2014 | A. Padilla, Juan I. Yuz, Benjamin Herzer, (2014), Continuous-time system identification of the steerring dynamics of a ship on a river, International Journal of Control, (ISI) | ISI |
| 2014 | M. Guzmán, F. Caire, (2014), Estudio de las fuerzas de avance en un proceso de taladrado utilizando brocas con geometría mejorada, Información Tecnológica (CIT), Vol. 25(1), 15-22 (Scielo) | Sin Indexación |
| 2013 | H. Perez, E. Diez, J. Marquez, A. Vizan, (2013), An enhanced method for cutting force estimation in peripheral milling, International Journal of Advanced Manufacturing Technology, In press (ISI) | ISI |
| 2013 | E. Diez, H. Perez, M. Guzmán, A. Vizan, (2013), An improved methodology for the experimental evaluation of tool runout in peripheral milling, International Journal of Advanced Manufacturing Technology 65, 283-293 (ISI) | ISI |
| 2012 | R. Hunter, N. Ibacache, J. Moller, R. Betancourt, T. Mora, E. Diez, B. Pavez, (2012), Influence of Roughness on the Mechanical Adhesion of Single Lap Joints, The Journal of Adhesion 88, 376-390 (ISI) | ISI |
| 2010 | A. Rosales, A. Vizan, E. Diez, A. Alanis, (2010), Prediction of surface roughness by registering cutting forces in the face milling process, European Journal of Scientific Research 41, 228-237 (Scopus) | Sin Indexación |
| 2010 | E. Diez, Perez H., M. Guzmán, A. Vizan, (2010) Dynamic analysis of runout correction in milling, International Journal of Machine Tools and Manufacture 50, 709-717 (ISI) | ISI |
| 2008 | H. Perez, J. Rios, E. Diez, A. (2008) Vizan, Increase of material removal in peripheral milling by varying feed rate, Journal of Materials Processing Technology 201, 486-490 (ISI) | ISI |
| 2007 | R. Hunter, J. Pérez, J. Marquez, J. Hernandez, (2007), Modeling the integration between technological product specifications and inspection process, Journal of Materials Processing Technology 194, 34-38 (ISI) | ISI |
| 2007 | H. Perez, A. Vizan, J.C. Hernandez, M. Guzmán, (2007), Estimation of cutting forces in micromilling through the determination of specific cutting pressures, Journal of Materials Processing Technology 190, 18-22 (ISI) | ISI |
| 2007 | R. Hunter, F. Alister, J. Möller, J. Alister, (2007), A new approach to modelling and designing mono-block dental implants, Journal of Achievements in Materials and Manufacturing Engineering, 22 (1), 77-80. | Sin Indexación |
| 2006 | J. Pérez, R. Hunter, J.C. Hernandez, A. Vizan, (2006), Fixture design process automation for Coordinate Measuring Machines: a knowledge-based approach, Materials Science Forum, 526, 103-108 (Scopus) | Sin Indexación |
| 2006 | R. Hunter, M. Guzmán, J. Möller, J. Pérez, (2006), Implementation of a tolerance model in a computer aided design and inspection system, Journal of Achievements in Materials and Manufacturing Engineering, 17 (1-2), 345-348. | Sin Indexación |
| 2006 | R. Hunter, J. Ríos, J.M. Pérez, A. Vizan, (2006), A functional approach for the formalization of the fixture design process, International Journal of Machine Tools and Manufacture, 46, 683-697 (ISI) | ISI |
| 2005 | R. Hunter, A. Vizan, J. Pérez b, J. Ríos, (2005), Knowledge model as an integral way to reuse the knowledge for fixture design process, Journal of Materials Processing Technology, 164-165, 1510-1518 (ISI) | ISI |
| 2021 | Astete, RB; Gutierrez- Caceres, N; Munoz-Catalan, M; Mora-Chandia, T Direct Improvement in the Combustion Chamber and the Radiant Surface to Reduce the Emission of Particles in Biomass Cooking Stoves Used in Araucania, Chile, WOS:00067 1238100001, Q2. |
Wos |
| 2021 | Rojas-Ulloa, C., Bouffioux, C., Jaramillo, A. F., García-Herrera, C. M., Hussain, T., Duchêne, L., Riu, G., Josep Roa, J., Flores, P., Marie Habraken, A., & Tuninetti, V. (2021). Nanomechanical Characterization of the Deformation Response of Orthotropic Ti–6Al–4V. Advanced Engineering Materials, 23(7), 2001341. https://doi.org/10.1002/adem.202001341 | Wos |
| Año | Autores y Títulos | Tipo |
